Skip to content

Polls & Surveys

Updated till version 4.0.7

Creating surveys

You can use the survey to make plans and coordinate with your teammates. For example, one member in a group can create a poll, and the others can vote on ideas and give feedback.

Create a survey

  1. Open a group chat.
  2. Tap the kebab menu icon beneath the box where you type your message.
  3. Select Survey from the dropdown menu.

  4. Tap the plus icon in the bottom right corner.

    • Alternatively, you can tap Create survey.

  5. Navigate to Settings > General and give a name to a survey.

  6. Proceed with adding questions to your survey.
  7. Tap the checkmark icon in the upper right corner.

Question types

VNCtalk provides over 5 ways to ask a question. To view a question type, hover over any question type on the left sidebar in the survey designer.

Question type Description
Radiogroup The question with radio buttons is a multiple-choice question with the ability to select any one of the response options. Radio buttons are used for single-select-type questions.
Checkbox The question with checkboxes allows you to collect multiple answers with a single question.
Single input The short (one-line) question allows you to collect short open-ended answers from respondents.
Timer/Quiz This hidden question is used to time—as well as limit—how long participants spend on a page of the survey.
Comment area Use the comment box to collect open-ended, written feedback from respondents.

Add questions

  1. In the survey designer, tap the additional menu icon and select a question type that can be added to your survey.
  2. Enter the question name.
  3. (If the question type is "Radiogroup" or "Checkbox") Enter the question answer options.
  4. Repeat steps 1 through 3 to add more questions.
  5. To change the order of questions in the survey, select a question, and then tap the customization icon and drag the question to the desired position in the survey.
  6. To copy a question, select it, and then select Duplicate question.
  7. To delete a question, select it, and then select the trash bin icon .

Preview survey design

Before you publish your survey, preview your survey design to see what your survey will look like to respondents. There is no possibility of editing a survey published, so it is helpful to edit your survey design before collecting responses.

  1. Once the survey is created, tap the Preview tab on the toolbar at the top of the page to see how your survey will look.
  2. To test your survey, enter responses for the questions in preview mode, and then select Complete.
  3. After previewing and testing your survey, navigate to the Designer tab.

Open-ended questions

Create a single input question

The single input question allows you to collect short open-ended answers from respondents. You can also validate the question to require answers in a specific length or format.

To add this question type:

  1. In the survey designer, tap the additional menu icon and select Single Input.
  2. Enter the question text.
  3. Tap the settings icon and configure any additional options.
  4. Tap the Preview tab on the toolbar at the top of the page to see how your survey will look.
  5. Tap the checkmark icon in the upper right corner.

Define input type attribute

The type attribute specifies the type of input element to display. If the type attribute is not specified, the default type is "text".

  1. On the question, tap the settings icon .
  2. Navigate to General.
  3. Enter the attribute in the Input type field.
  4. (Optional) Specify a short hint that describes the expected value of a text area in the "Input area placeholder" field. The short hint is displayed in the text area before the user enters a value.

Attrubute Value
color Defines a color picker
date Defines a date control (year, month, day (no time))
datetime-local Defines a date and time control (year, month, day, time (no timezone)
email Defines a field for an e-mail address
month Defines a month and year control (no timezone)
number Defines a field for entering a number
password Defines a password field
tel Defines a field for entering a telephone number
text Default. Defines a single-line text field
time Defines a control for entering a time (no timezone)
url Defines a field for entering a URL
week Defines a week and year control (no timezone)

Enable autocomplete option

Autocomplete is a word completion feature that displays predictive text based on the entered characters and allows respondents to fill a survey field after they enter only a few characters.

The autocomplete attribute works with the following input types: text, search, url, tel, email, password, and color.

  1. On the question, tap the settings icon .
  2. Navigate to General.
  3. Enter the autocomplete attribute in the "Autocomplete type" field.

Multiple choice questions

Create a multiple-choice question

Multiple Choice is a simple closed-ended question type that lets survey takers select one answer from a defined list of choices.

  1. In the survey designer, tap the additional menu icon and select one of the following options:

    • Radiogroup
    • Checkbox

  2. Enter the question text.

  3. Tap the settings icon and configure any additional options.
  4. Tap the Preview tab on the toolbar at the top of the page to see how your survey will look.
  5. Tap the checkmark icon in the upper right corner.

Add a comment area

Adding a Comment area to a close-ended question allows people to either offer additional information about their choice or provide an alternative answer if the available answer choices do not apply to them.

  1. On the question, tap the settings icon .
  2. Navigate to the General section.
  3. Check the box next to Show the comment area.
  4. Enter your text in the Comment area and Comment placeholder fields.

Question settings

This section covers formatting options available to every question type.

Once you have created a question, you can customize it to fit your survey. To begin formatting a question, tap the settings icon in the survey designer.

Edit question name, title, and description

You can change the question name, title, and description.

  1. Tap the settings icon .
  2. Navigate to the General section.
  3. Enter the new title in the Name, Title, and Description fields.

Set visibility of a question

By default, every question in a survey is visible to respondents. You can hide a question from being displayed in a survey.

  1. Tap the settings icon .
  2. Navigate to the General section.
  3. Uncheck the box next to Visible.

Mark a question as required

By default, a question doesn't have to be answered by respondents. If you want to require that the question be answered, do the following:

  1. Toggle on for those questions that you’d like to make mandatory for your participants to answer.
  2. You can also tap the settings icon .
  3. Navigate to the General section.
  4. Check the box next to Required.

Make a question read-only

When a question is Read-only, the participant cannot change the answer to that question during a survey.

You can use the read-only property for:

  • Seeding the question with values from a participant database that you do not want the participant to change
  • The question contains an initial value that is based on answers to previous questions in the survey that you do not want the participant to change

To make a question read-only, do the following:

  1. Tap the settings icon .
  2. Navigate to the General section.
  3. Check the box next to Read-only.

Add & edit response choices

Once you have created a question, it’s time to add some choices for your respondents to pick from.

  1. Tap the settings icon .
  2. Navigate to the Choices section.
  3. Use the plus icon and trash bin icon to change the number of choices in the question.
  4. You may also tap the erase icon to delete all response options.
  5. To specify the visibility of choice, tap the pencil icon .

  6. You can also define additional choice options:

    • Allow the Other option. This option lets you add a text box to your answer choice, allowing respondents to enter their own answer choice.
    • Allow the None option. This option lets you add an N/A (not applicable) option.
    • Allow the Select All option.

Customize question visibility

It is possible to show or hide any survey element based on certain criteria, for example, the response to the current question. With this capability, you can implement skip logic and branching in your survey.

To conditionally change the visibility of a survey question, specify its visible if property. It accepts a Boolean expression. The survey element becomes visible when this expression evaluates to true.

  1. Tap the settings icon .
  2. Navigate to the Logic section.
  3. Specify visible if, editable if, and required if properties.
  4. (Optional) Specify a default value for the question.
  5. (Optional) Customize visibility and selectability properties of choices.

Customize question layout

You can change the position or layout of questions on a page.

To adjust the question layout:

  1. Tap the settings icon .
  2. Navigate to the Layout.
  3. Configure the options as needed.

The question layout options vary depending on the question type.

Option Description
Question Placement You can choose the question that appears directly below the previous question by checking the box next to Display a question on a new line.
Question number You can hide the question number.
Panel expand state You can choose from the following options: Inherit, Collapsed, Expanded.
Title and description location You can change the title location of your survey at any time. The survey and description title will appear at the top of each survey page as your respondents take the survey unless you choose to change its location.
Indents Add extra padding to the left of the question.
Width You can set a fixed pixel width that will remain fixed regardless of the page width.
Input size (You can change the input size on the short answer question questions) You can determine how many characters the respondent can enter in the field.
Column count (You can change the number of columns on the questions with checkboxes and radio buttons) You can determine how many columns of answers will be displayed in the answer field.

Customize validation message

Custom validation messages allow you to replace the system validation messages with your own validation message to let respondents know why they failed or what they need to change to submit the survey.

  1. Tap the settings icon .
  2. Navigate to the Validation.
  3. In the "Required" error message box, enter your custom validation message.
  4. To add other validators, tap the plus icon and then fill in the Error message and Validation Expression fields.

Customize question title location

You can change the question title location to Top, Bottom, and Left.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Question.
  3. Under the Question title location section, select the preferred option.

Change the required symbol

You can make any question in your survey required so that survey takers must answer it before submitting the page. By default, required questions are marked by an asterisk (*).

You can change the required symbol.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Question.
  3. In the Required symbol field, enter the preferred option.

Change the numbering style

You can specify the numbering style that you want. Choices include Arabic numerals, uppercase and lowercase Roman numerals, and uppercase and lowercase alphabet letters. You can also choose no numbers at all, killing the sequential numbering.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Question.
  3. In the Start index (number or letter) field, enter the preferred option.

Customize error message location

You can change the error message location to "Top" or "Bottom".

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Question.
  3. Under the Error message location section, select the preferred option.

Change the order of survey questions

You can change the order of any questions in your survey. You can apply it to all questions on the page/ pages.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Question.

  3. Under the "Element order on the page" section, choose from the following options:

    • Random. Questions will appear in random order.
    • Initial. Questions will appear in the order you've created the questions.

Set maximum answer length

The answer question type allows your respondents to write open-ended answers in a textbox. You can set the character limit.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Question.
  3. In the Maximum answer length (in characters) field, enter the preferred option.

Multiple-page survey

Add a page

You can split your survey into multiple pages to help organize and break up a long list of questions.

You can add pages in an existing survey, and then move the questions up or down accordingly on the page. If you're creating a new survey, you can add pages while adding questions.

There are 2 ways to add the page to the survey.

Way 1. From the survey designer.

  1. In the survey designer, tap Add question. A new page will be added to the survey.
  2. Enter the page name. You can also enter an optional description for it.
  3. Add new questions to the page, or move existing questions to the page as required.

Way 2. Navigating to "Settings > Pages".

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Pages.
  3. Under the "Pages" section, tap the plus icon .
  4. The further steps are the same as for the first way of adding a page.

Edit page name and description

You can add page titles to the different pages in your survey to keep it organized.

There are 3 ways to change the name.

Way 1. From the survey designer.

  1. In the survey designer, tap the page/ description name.
  2. Make your changes.
  3. Tap outside the name/ description field to save.

Way 2. From survey settings.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Pages.
  3. Tap the name of the page and make your changes.

Way 3. From the page settings.

  1. In the survey designer, navigate to the Settings tab.
  2. Tap the page you want to edit the name and description and tap the settings icon in the upper right corner. You'll be redirected to the Settings page.
  3. Navigate to General.
  4. Enter the new title in the Name, Title, and Description fields.

Make the page visible or read-only

  1. In the survey designer, navigate to the Settings tab.
  2. Tap the page you want to edit the name and description and tap the settings icon in the upper right corner. You'll be redirected to the Settings page.
  3. Navigate to General.
  4. Check the box next to Read-only to make the group of questions on the page read-only.
  5. Check the box next to Visible to make the group of questions on the page visible.

Set time limit on pages

  1. In the survey designer, navigate to the Settings tab.
  2. Tap the page you want to edit the name and description and tap the settings icon in the upper right corner. You'll be redirected to the Settings page.
  3. Navigate to General.
  4. Under the "Time limit to finish the page", add the amount of time that you want to limit your respondents.

Apply page logic

You can use page logic to conditionally show groups of questions based on a previous answer. Instead of going through the steps for setting up logic on question after question, you can move all questions with the same logic rules to a single page and set up the logic on the page.

  1. In the survey designer, navigate to the Settings tab.
  2. Tap the page you want to edit the name and description and tap the settings icon in the upper right corner. You'll be redirected to the Settings page.
  3. Navigate to Logic.
  4. Specify visible if, editable if, and required if properties.

Change page layout

You can customize the question title location, element order on the page, and navigation button visibility.

  1. In the survey designer, navigate to the Settings tab.
  2. Tap the page you want to edit the name and description and tap the settings icon in the upper right corner. You'll be redirected to the Settings page.
  3. Navigate to Layout.
  4. Configure the options as needed.

Option Description
Question title location You can choose from the following options: Inherit, Collapsed, Expanded.
Element order on the page Allows you to change the order of any or all elements of your survey page.
Navigation button visibility The navigation buttons let you move through the survey and make it easy to answer the surveys. You can choose from the following options: Inherit, Visible, Hidden.

Reorder pages

You can move a page to another position in the survey.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Pages.
  3. Tap the customization icon and drag the pages into their new order.

Remove a page

If you no longer need a page in the survey, you can delete it. When deleting, you delete all questions currently on that page.

There are 2 ways to remove a page.

Way 1. From the survey designer.

  1. In the survey designer, tap the page.
  2. Tap the trash bin icon in the upper right corner of the page container.

Way 2. Navigating to "Settings > Pages".

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Pages.
  3. Tap the trash bin icon next to the page you want to delete.

Show or hide page titles/ numbers

You can hide the titles and page numbers in your survey.

  1. In the survey designer, navigate to the Settings tab.
  2. Navigate to Pages.
  3. Uncheck the boxes next to Show page titles or Show page numbers respectively.

Survey management

View survey results

You can view and analyze your results at any time. Here you can see summaries of every survey question, browse individual responses, compare, view, and download your results for an in-depth analysis.

  1. Open a group chat.
  2. Tap the kebab menu icon beneath the box where you type your message.
  3. Select Survey from the dropdown menu.
  4. Tap the kebab menu icon next to the survey you want to view.
  5. Select View results from the dropdown menu.

You will see a graphical representation of the responses. Depending on the question type you used in your survey, you will see different visualizations to best represent your survey responses.

Change display of text responses

  1. Follow the steps above 1 through 5 to navigate to the survey results page.
  2. Select a question with text responses and then tap the down arrow icon in the dropdown menu field.

  3. Select one of the following options:

    • Wordcloud is a visual representation of the most common words and phrases from your open-ended responses.
    • Text in table displays the list of frequent words and the frequency at which these words appear.

Change display of multiple-choice responses

  1. Follow the steps above 1 through 5 to navigate to the survey results page.
  2. Select a question with multiple-choice responses and then tap the down arrow icon in the dropdown menu field.

  3. Select one of the following options:

    • Bar: Responses will be displayed as vertical bar graphs. The length of these bars is proportional to the values they represent.
    • Pie: Responses will be displayed as a circle that is divided into areas, or slices. Each slice is proportional to the quantity it represents.
    • Doughnut: Responses will be displayed as a Pie Chart with an area of the center cut out.
    • Scatters: Answers will be displayed as a set of data in which the values of pairs of variables are plotted on a coordinate system.

  4. (If the Bar/ Scatters view is selected) To change the response display order, tap the dropdown menu and select one of the following options:

    • Default: Response options will be displayed in the same order as set by the user.
    • Ascending: Response options will be sorted in ascending order alphabetically.
    • Descending: Response options will be sorted in descending order alphabetically.

View survey voters

  1. Open a group chat.
  2. Tap the kebab menu icon beneath the box where you type your message.
  3. Select Survey from the dropdown menu.
  4. Tap the kebab menu icon next to the survey you want to view.
  5. Select View voters from the dropdown menu.

Delete a survey

You can delete a survey that you don't need anymore. The deletion of a survey is permanent and can't be reverted.

  1. Open a group chat.
  2. Tap the kebab menu icon beneath the box where you type your message.
  3. Select Survey from the dropdown menu.
  4. Tap the kebab menu icon next to the survey you want to view.
  5. Select Delete from the dropdown menu.

Servey Settings

Customize general settings

General settings allow you to customize survey language, cookie name, and width mode, and make the survey editable or read-only. To customize general settings:

  1. In the survey designer, navigate to the Settings tab.
  2. Select General.
  3. Customize your settings.

Option Description
Survey language Changing your survey language switches certain default survey text — like navigation buttons — to another language. It does not translate any text you have provided — i.e. the question text and answer options. You must translate the questions and answer options into the relevant language yourself.
Editable or Read-only There can be 2 question modes displaying:
— Editable. Response editing allows you to revise survey responses.
— Read-only. The read-only mode of questions automates the completion of the survey when you reference data for an answer from another question, or when the answer from one question directly relates to other questions.
Cookies Prevent users from filling out the same survey twice.
Width mode You can set up the width for the question text as well as the answer options text.
Width (in CSS-accepted values) You can get or set maximum/ minimum survey element width in CSS values.

Specify the logo fit size

A logo can be automatically resized to fit into its container.

  1. In the survey designer, navigate to the Settings tab.
  2. Select Logo in Survey Title.
  3. Specify the mode used to resize the logo: contain (default), cover, fill, or none.

Change survey navigation behavior

You can control how survey navigation buttons appear and behave. You can also change how the survey behaves when respondents click a navigation button.

To customize navigation settings:

  1. In the survey designer, navigate to the Settings tab.
  2. Select Navigation.

  3. To edit survey navigation button text, enter button text for:

    Button Description
    Page previous button text The default text is “Previous.”
    Page next button text The default text is “Next.”
    Complete button text The default text is “Complete.”
    Preview answers button text The default text is "Preview answers".
    Edit answers button text The default text is "Edit answers".
    Start button text (The default text for this button is “Start.”)

  4. Select additional navigation options as needed:

    Button Description
    Preview answers before submitting a survey To allow survey respondents to preview their answers before completing the survey.
    Show previous button To allow survey respondents to return to a previous page, select this checkbox; to remove the previous button, deselect this checkbox.
    The first page is a started page To show a welcome page as the start page instead of the first survey question, select this checkbox.
    Proceed to the next page automatically Proceed to the next page automatically when all questions are answered.
    Show progress bar location With a progress bar (completed pages), participants can see how far along they are in the survey. It gives participants an idea of both how far they’ve come and how much further they have to go. To add a progress bar for surveys with multiple pages, select either "top", "bottom", or "both" of the survey as the progress bar location.
    Progress bar type You can also specify the information the progress bar displays: the number of completed pages, answered questions, answered required questions, or correct answers.
    Show all questions on a single page If your survey has multiple pages, this option shows all questions on one page.

Add conditional logic to a survey

You can implement custom conditional logic in your survey.

  • The calculated value is a way to define the variable in Survey Creator. It has two main properties: name and expression. Based on expression the value read-only property is automatically calculated. The name property should be unique for all calculated values.

  • Triggers allow you to implement additional logic that isn't related to read-only or required state or visibility. Each trigger is associated with an expression and an action. A survey re-evaluates this expression each time values used in it are changed. If the expression returns true, the survey performs the associated action.

    The following triggers are available:

    Trigger Description
    Complete Completes the survey. The expression is evaluated only when a user switches to the next page. For example, a trigger can complete the survey if the "age" question on this page has a value under 18.
    Run expression If the expression is true, the trigger runs another expression specified by the "run Expression" property.

To implement custom conditional logic in your survey, do the following:

  1. In the survey designer, navigate to the Settings tab.
  2. Select Logic.

  3. Under the Calculated Values section, tap the plus icon in the upper right corner.

    • You can also tap Add new.

  4. Type the name and expression in the respective fields.

  5. Under the Triggers section, add trigger conditions for the survey.

Customize survey data settings

  1. In the survey designer, navigate to the Settings tab.
  2. Select Data.

  3. Specify when to remove values of invisible questions from survey results.

    • When the survey is completed (default). Clear invisible question values when the survey is complete.
    • Never. Keeps invisible values in survey results.

  4. Specify when to update the question value in questions with a text input field.

    • On blur (default). Update the value after the input field loses focus.
    • On typing. Update the value on every key press.

  5. (Respondents may not complete your survey in a single session. In this case, you can restore their answers from the previous session next time they get to the survey.) Check the box next to Save partial survey results in progress to save incomplete results.

  6. Check the box next to Store the Other value in a separate field, if you want to save the "Other" value in a single field.

Customize survey validation settings

You can validate user responses on the client or server side. Validation activates before a user proceeds to the next page. If the current page contains errors, the survey indicates them and focuses on the first question with an invalid answer.

  1. In the survey designer, navigate to the Settings tab.
  2. Select Validation.
  3. Check the box next to Set focus on the first invalid answer.

Add a survey timer

A survey timer lets your respondents know how much time they have left to complete the entire survey. You can set up a maximum time limit to answer all questions in your survey. When a timer is set, the respondents will have to complete the survey within the time limit and if they fail to do so, the responses they have entered until then will be automatically submitted.

  1. In the survey designer, navigate to the Settings tab.
  2. Select Timer/Quiz.
  3. In the Time limit to finish the survey field, enter the maximum time duration for the survey.
  4. Under the Timer location section, choose the preferred option.
  5. Under the Timer mode section, choose Survey.

Add a page timer

You can use the page timer to make sure your respondents only spend the required time on the pages of your survey. When a page timer is set, the respondents will have to complete the page within the time limit; if they fail to do so, the responses they have entered until then on the page will be automatically submitted, and the survey will load the following page.

  1. In the survey designer, navigate to the Settings tab.
  2. Select Timer/Quiz.
  3. In the "Time limit to finish one page" field, enter the maximum time duration for the survey.
  4. Under the Timer location section, choose the preferred option.
  5. Under the Timer mode section, choose Survey.